Teac Pico-1 User Manual page 17

If you press ENTER, you will see the following message:
The copying will be resumed after approx. 30 seconds.
If the Pico-1 does not detect any potential problems with the discs
it will write the TOC information onto the slave CDs. The screen
contains the following message during this process:
5. After this the copying is started. The percentage which has been
written is shown on the display, along with an animated display to
indicate that writing is currently in progress:
This operation may take a minute or more, depending on the com-
plexity of the disc.
6. When the finalization operation is complete, the display will show:
The trays are opened automatically. You can now remove the discs
using the eject buttons on the drives (these are disabled while the
copy process is taking place). Alternatively, you can compare the
original with the copy (see:
3. Modes
Erasing Erasing Erasing
Erasing Erasing
CD-RW disk CD-RW disk
CD-RW disk CD-RW disk CD-RW disk
Writing Writing Writing
Writing Writing
TOC TOC
TOC TOC TOC
Writing Writing Writing Writing Writing
7% 7% 7%
7% 7%
Copy Copy
Copy Copy Copy
Complete Complete Complete
Complete Complete
3.4. „Compare CD-ROM").
49