Play Audio Track - Teac Pico-4 User Manual

Cd copy station

Table of Contents

3.5 Play Audio Track

Since it is impossible to make a bit-by-bit comparison of audio CDs,

this function is provided for you to „audition" a CD copy. Plug audio

equipment like an amplifier to the audio connectors at the rear of the

Pico-4. Insert the CD to test into the master drive.

Press the MODE key until the display shows the following:

Press ENTER.

After the ENTER key has been pressed, a Please wait ...

message is briefly shown and track 1 will start playing.

Pressing ENTER again will jump to the next track and start play-

back. If the last track is reached in this mode, and the ENTER key

is pressed, playback will start at the first track.

If the MODE key is pressed while for example the fifth track is

played the following is displayed:

Pressing the ENTER key will start playing the track before the cur-

rent track. If the first track is currently being played, and the EN-

TER key is pressed, the last track will start playing.

3. Modes

Mode select

4 Play audio

Track 01 Play

1 Next track

Track 05 Play

2 Previous track

Please wait ...

Table of Contents

Show Quick Links

Table of Contents