Basic Operations - Teac Pico-1 User Manual

Cd copy station

Table of Contents

2.3 Basic Operations

2.3.1 Power-up procedure

When the unit is powered up using the POWER switch

self-check operation, and the screen shows the following:

If the self-check is passed, the display will show the first menu screen,

otherwise an error message will be displayed.

2.3.2 Inserting discs

Press the eject button of the MASTER or the SLAVE drives to open the

disc tray. Place discs label side uppermost in the disc tray. If a disc is

placed into a tray upside-down or off-center, an error message will

appear on the display. Close the tray by shifting it into the slot until it is

locked.

2.3.3 Power down

Before powering down the unit, eject discs from all drives (the eject

mechanism requires power to work, and so you will not be able to eject

the discs once power is turned off).

NOTE

Do not turn off the Pico-1 while writing to the slave disc (i.e.,

part of the way through a disc copy operation). If you do, the

disc will be corrupt, and unusable.

2.3.4 Care of CD-R/CD-RW media

The Compact Disc medium is a robust medium, and the disc can sur-

vive a good deal of physical abuse. However, there are precautions

that you should take when handling CD-R discs which are different to

those you should take when handling ordinary CDs.

Avoid touching the recording (non-label) side of a disc on which you

will be recording. Recording on a disc requires a cleaner surface than

playing back, and fingerprints, grease, etc. can cause errors in the re-

cording process.

2. General Description

Initializing

Please wait...

, it performs a

Table of Contents