Basic Operations - Teac CS-Single-12 User Manual

Cd copy station

Table of Contents

2.3 Basic Operations

2.3.1 Power-up procedure

When the unit is powered up using the POWER switch

self-check operation, and the screen shows the following:

If the self-check is passed, the display will show the first menu screen,

otherwise an error message will be displayed.

2.3.2 Inserting discs

Press the eject button of the MASTER or the SLAVE drives to open the

disc tray. Place discs label side uppermost in the disc tray. If a disc is

placed into a tray upside-down or off-center, an error message will

appear on the display. You can close the disc trays by pressing the

eject button on the drive, (though many operations will close the disc

trays automatically).

2.3.3 Power down

Before powering down the unit, eject discs from all drives (the eject

mechanism requires power to work, and so you will not be able to eject

the discs once power is turned off).

NOTE

Do not turn off the CS-Single-12 while writing to the slave disc

(i.e., part of the way through a disc copy operation). If you do,

the disc will be corrupt, and unusable.

2.3.4 Care of CD-R media

The Compact Disc medium is a robust medium, and the disc can sur-

vive a good deal of physical abuse. However, there are precautions

that you should take when handling CD-R discs which are different to

those you should take when handling ordinary CDs.

2. General Description

TEAC

Initializing

, it performs a

Table of Contents