16-Using The Footswitch; Setting Footswitch Operation - Tascam GB-10 Owner's Manual

This unit has a REMOTE jack to which you can connect
a TASCAM RC-3F footswitch-type remote control (sold
separately) that can be used to operate the unit.

Setting footswitch operation

Use the " " setting screen to make footswitch settings.
FOOT SW
1. Press the MENU button to open the MENU screen.
2. Use the BROWSE and
§/
" " menu item, and press the
FOOT SW
button to open the
FOOT SW
3. The " " item and the three footswitch pedal
MODE
assignments are shown.
/ buttons to select the
¶
button or
Á
screen.

16-Using the footswitch

4. Use the VALUE (+/–) buttons to change the "MODE"
item.
MODE
PLAY
TRAINER
EFFECT
RECORD
MINUTES
5. After completing the setting, press the HOME button to
¯
return to the Home Screen.
Using the footswitch
Press a pedal on the footswitch to operate the unit. The
function of each pedal corresponds to the assignment shown
on the
FOOT SW
FOOT SW
L C
REW PLAY/STOP
FLASH PLAY/STOP
PRESET − PLAY/STOP
OVERDUB REC/PAUSE
REW PLAY
screen.
R
FWD
SPEED CHANGE
PRESET +
STOP
FWD
83
TASCAM GB-10