Quick Start Guide
Step 1: Prepare the SD card and
power
ª
Install the SD card
Insert the SD card into the SD card slot, which is inside the
battery compartment on the bottom of the unit.
Formatting is necessary if you insert a new SD card.
(Formatting will erase all the data on the card.)
For details, see "Inserting and removing SD cards" on page 37.
10
TASCAM GB-10
ª
Preparing the power
Using AA batteries
Insert AA batteries into the battery compartment, which you
opened when installing the SD card. This unit can use either
alkaline or nickel-metal hydride (NiMH) batteries. It cannot
recharge batteries.