Using An Ac Adaptor (Sold Separately) - Tascam GB-10 Owner's Manual

whether to use USB bus power ("
the unit's storage to the computer ("
Use the § /BROWSE button or
" and press the
Á
POWER
computer USB port and open the Home Screen.
CAUTION
Connect this unit and the computer directly. Operation using
a USB hub cannot be assured.
NOTE
If you connect to a computer by USB, power will be supplied
from the USB bus even if batteries are also in the unit.
.
") or to connect
BUS POWER
").
STORAGE
¶ / button to select "
button to provide power from the

Using an AC adaptor (sold separately)

Connect a TASCAM PS-P520 AC adaptor (sold separately),
which is designed for the power requirements of this unit, to
the DC IN 5V jack as shown in the illustration.
BUS
TACAM
PS-P520
(sold separately)
CAUTION
Never use any adaptor other than the TASCAM PS-P520 AC
adaptor (sold separately), because it is designed for the power
requirements of this unit. Use of a different adaptor could
cause malfunction, fire or electric shock.
NOTE
If batteries are installed and the AC adaptor is connected,
power will be supplied from the AC adaptor.
3–Preparation
AC outlet
DC plug
41
TASCAM GB-10