Playing Back from Disc Navigation Screen
1
Press the DISC NAVIGATION button.
2
Use the control buttons to select the desired
scene.
The selected scene will be framed: This is called
a "cursor".
All Programs
001/014
PLAY
RAM
When playback ends:
The DVD Video Camera will
enter the playback pause
status at the last image of last
scene.
Pressing the C or DISC
NAVIGATION button will
restore the Disc Navigation
screen.
When the playback pause status continues for as
long as 5 minutes, the Disc Navigation screen will
automatically be restored.
Playing back stills
When playing back stills on disc, a still will be
displayed for approx. 3 seconds.
When playing back stills on card, playback will stop
after each still playback.
3
Press the A button.
Playback will start from the selected scene.
Note
Pressing the
preceding or following scene.
Pressing the
following page.
All Programs
007/014
PLAY
RAM
:
Note
•
Press the
Pressing
•
If you press the
scene on disc finishes, playback will start again from the
beginning of disc.
•
Pressing the
Navigation screen.
•
With playback on Disc Navigation, you can select desired
scenes for playback and skip unnecessary scenes.
Playback pause
•
When playing back a card still with a large number of
pixels, "Playback." will appear, and it will take some time
for the still to appear.
:
d
c
/
button will move the cursor to the
f
e
/
button will move to preceding or
A
A
button to temporarily stop playback.
A
again will start from that point.
A
button after playback of the last
C
button will always restore the Disc
91