Copying Stills On Dvd-Ram Disc To Card (Copy) - Panasonic VDR-M55EB Operating Instructions Manual

Copying Stills on DVD-RAM Disc to Card (Copy)

1
Set the power switch to "
2
Press the DISC NAVIGATION button.
3
Select the still to be copied.
4
Press the MENU button.
5
Choose "Copy" on the
"Scene" menu screen,
and then press the A
button.
6
The "Copy to card"
screen will appear. If you
are sure you want to copy
the selected still, press
the A button.
If you want to change the
still to be copied, you can change it on this
screen.
7
The screen for verifying
copy will appear. Choose
"YES", and then press the
A button.
Choose "NO" to cancel
copy.
After Yes or No setting, the "Copy to card" screen
will be restored.
Repeat steps 6 and 7 to copy other stills to card.
8
Press the C button to quit.
102
" or " ".
Note
•
•
•
•
•
•
Scene
Edit
•
Effect
Copy
•
Select
Detail
ETC
ENTER RETURN RAM
Copy to card 003/014
ENTER EXIT RAM
Copy to card
Copy PHOTO scenes
to card?
YES NO
ENTER
:
No movie can be copied.
When you copy stills recorded on DVD-RAM disc to card,
recording quality will automatically be set to "FINE".
If you press the MENU button before pressing the
button in step 6, the submenu screen will appear (P. 96).
See "Category" (P. 121) to check the stills recorded on
DVD-RAM disc.
You can also select multiple scenes (P. 92).
Even if all scenes, including movies, are selected to be
copied, only stills will be copied.
Data on card cannot be copied to disc.
Stills recorded on a device other than this DVD Video
Camera may not be copied normally.
1
A