Jumping to Specified Point (Go To)
1
Press the MENU button
during playback.
2
Choose the option (point
you want to go to), and
then press the A button.
Specifying the point to view
1
Choose "Specify" in step 2 above, and then
press the A button.
The screen for specifying the point to go to will
appear.
Position of currently
played back image
Go T o
TOP
CURRENT
0 : 00 : 00
0 : 03: 26
Cursor
0 : 03: 26
GO TO
TOP
END
Cursor position
2
Use the control buttons to select the desired time
of chosen point.
Press the f button
Press the e button
Press the d or c button :
–
Press once: To move the cursor in 10-
second units (1-still units for
card)
–
Hold down: To move the cursor in 1-
minute units (10-still units
for card)
Go T o
TOP
0 : 00 : 00
GO TO
TOP
END
(When the start of scene is selected)
Cursor at current image position.
Cursor at (GO TO) position.
60
Go T o
To p
En d
S p e c i f y
ENTER
RETURN
RAM
Total recording time of
all selected scenes
END
0 : 24 : 24
ENTER
CANCEL
: To select the start.
: To select the end.
CURRENT
END
0 : 03: 26
0 : 24 : 24
0 : 0 0 : 00
ENTER
CANCEL
Top
:To go to the start, and enter playback
pause.
End
:To go to the end of last scene, and enter
playback pause.
Specify :To go to a specified point and enter
playback pause. See the following for
details.
3
Press the A button to enter the selection.
The DVD Video Camera will go to the specified
point and enter the playback pause status.
To cancel the "Go To" procedure midway, press the
g button before going to the specified point.
:
Note
•
If multiple scenes are selected using the Disc Navigation
function or SELECT button, choosing "Top" will jump to
the beginning of selected scenes (P. 116).
•
When multiple scenes are selected, the total time of
selected scenes will appear in the "total recording time"
display.
•
When card is loaded, the number of stills will appear.
•
The cursor may not move at same-pitch intervals.
123