Spektrum DX6I User Manual page 25

TIMER
The DX6i features an on screen timer with two programming options:
DOWN-TIMER:
Down Timer - The countdown timer allows a preset time in ten-second intervals up to 59 minutes and 50 seconds
to be programmed, and when that time expires, a beeper will sound five (5) beeps every five (5) seconds.
UP-TIMER:
Up Timer - The up timer function is a simple count-up timer that displays minutes and seconds up to 59
minutes and 59 seconds. The start time can be programmed. In most cases the default start setting of 00:00 is
recommended.
When the DOWN-TIMER or UP-TIMER function is selected, the timer will be displayed on the main screen. The
following buttons are used in conjunction to operate the timer function:
Trainer Timer button- when programmed Used to stop start and reset the timer.
Throttle Cut button- when programmed Used to start stop and reset the timer.
Note: To reset the timer press and hold the assigned timer switch (throttle cut or trainer) for more
than 3 seconds.
TO SElECT ThE TIMER fUNCTION
Press the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen
release the roller.
Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST
then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST then press the roller.
Reduce photo to 13.5%
SETUP LIST
MODEL TYPE
48
Main
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
SETUP LIST
D/R COMBI
TIMER
RANGE CHECK
Rotate the roller to highlight TIMER then press the roller to access the Timer function.
MDL6 MUSTANG
DOWN TIMER-06:00
SWITCH---TRAINER
TO PROGRAM ThE TIMER fUNCTION
Rotate the roller to highlight the desired timer function that you wish to change.
UP/ Down- selects the up or down timer function
TIME- in minutes or seconds
Switch Options- Trainer or Throttle Cut
When the desired function is highlighted press the roller to access the function.
Rotate the roller to change the option or value.
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE SETUP lIST
Rotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system to the
SETUP LIST screen.
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
Main
8
Reduce photo to 13.5%
TIMER
List
49