Spektrum DX6I User Manual page 23

Rotate the roller to highlight WINGTAILMIX then press the roller to access the Wing tail mix function.
Reduce photo to 13.5%
SETUP LIST
THRO CUT
WINGTAILMIX
D/R COMBI
TO SElECT A WING/TAIl TyPE
Rotate the roller to highlight the desired wing or tail type then press the roller to highlight the desired function.
Rotate the roller to inhibit (INH) or activate (ACT) the function.
Reduce photo to 13.5%
WINGTAILMIX
DUALAILE INH
V-TAIL
ELEVON
Note: When Flaperon or Delta Wing type is selected, the travel adjustment is used to adjust the
individual servo throw, while the combined aileron travel is adjusted with the aileron dual rate. It
is also possible to set aileron differential. Reverse switches are applicable for each servo. Neutral
adjustments of each servo are made by the Sub Trim Function.
44
Main
6
List
INH
INH
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
DUAl AIlERON WING TyPE SERvO CONNECTIONS
• AILE servo port (right aileron)
• AUX1 servo port (left aileron)
Dual Aileron Wing Type Connection
AUX1 Servo Port
(Left Aileron)
• RUDD servo port (right V-tail)
• ELEV servo port (left V-tail)
V-Tail Type Connection
ELEV Servo Port
(Left V-Tail)
• ELEV servo port (right aileron)
• AILE servo port (left aileron)
Elevon Wing Type Connection
AILE Servo Port
(Left Aileron)
TO RETURN TO ThE MAIN SCREEN
Press and hold the roller for more than 3 seconds then release the roller and the system will return
to the main screen.
TO RETURN TO ThE SETUP lIST
Rotate the roller to highlight LIST in the upper right corner then pressing the roller will return the system to the
SETUP LIST screen.
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
AILE Servo Port
(Right Aileron)
RUDD Servo Port
(Right V-Tail)
ELEV Servo Port
(Right Aileron)
45