Spektrum DX6I User Manual page 17

TO ENTER ThE SETUP lIST
Press the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen,
release the roller.
Reduce photo to 13.5%
SETUP LIST
MODEL TYPE
Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST
then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST; then press the roller and the
SETUP LIST will appear.
TO EXIT ThE SETUP lIST
Press and hold the roller for more than 3 seconds, then release the roller and the system will return to
the main screen.
Alternatively rotating the roller to highlight MAIN in the upper right corner then pressing the roller will return
the system to the main screen.
Turning the transmitter off then back on will return the transmitter to the main screen.
32
Main
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
MODEl TyPE fUNCTION
The DX6i features two programming types: Airplane and Helicopter. The DX6i can memorize data for up to 10
models individually and the model type will automatically be stored with each model memory.
TO ENTER ThE MODEl TyPE fUNCTION
Press the ROLLER and hold while turning on the transmitter. When SETUP LIST appears on screen
release the roller.
Alternatively the setup list can be accessed from the main screen by pressing the roller to access the ADJUST LIST
then scrolling through the ADJUST LIST by rolling the roller to highlight SETUP LIST then press the roller.
MODEL TYPE appears on the lower section of the screen.
SETUP LIST
MODEL TYPE
Rotate the roller to highlight MODEL TYPE then press the roller to access the MODEL TYPE function.
SETUP LIST
MODEL TYPE
SPEKTRUM DX6i • RADIO PROGRAMMING GUIDE
Reduce photo to 13.5%
Main
Reduce photo to 13.5%
Main
1
33