Using The Remote Controller - Panasonic Digital Palmcorder PV-GS70 Operating Instructions Manual

10˚
1
15˚
15˚
15˚
START/
DATE/ PHOTO
STOP
OSD TIME SHOT
COUNTER RESET TITLE ZOOM
T
MULTI/
¥
REC A.DUB
P-IN-P
V /REW PLAY FF/ W
W
6 1 5
STILL ADV PAUSE STILL ADV
E ; D
2
INDEX STOP INDEX
K L
∫
SELECT
VAR. P.B.
SEARCH ZOOM
STORE
MENU
SET
OFF/ON
ITEM
P.B.DIGITAL
ª Using the Remote Controller
1
Direct the Remote Controller at the Remote Control
Sensor on the Palmcorder and press the desired
button.
≥Distance from the Palmcorder: Within approximately 15 feet
(5 meters)
≥Angle: Within approximately 10o in the upward, and 15o in the
downward and horizontal directions from the central
axis
≥The above operating ranges are for indoor use. Outdoors, or under
strong light, the equipment may not operate properly even within
the above ranges.
≥Within 3 feet (1 meter) range, you can also use the Remote
Controller on the side (the LCD Monitor side) of the Palmcorder.
Selecting Remote Controller Modes
When 2 Palmcorders are used simultaneously, they can be operated
individually by selecting different Remote Controller Modes.
≥If the Remote Controller Mode on the Palmcorder and Remote
Controller do not match, [REMOTE] is displayed.
Setting on the Palmcorder:
1
Set [REMOTE] on the [OTHER FUNCTIONS] Sub-Menu to the
desired Remote Controller Mode.
Setting on the Remote Controller:
[VCR1]: Press the [D] Button and [∫] Button simultaneously.
[VCR2]: Press the [E] Button and [∫] Button simultaneously.
≥When the battery in the Remote Controller is replaced, the Mode is
automatically reset to [VCR1] Mode.
17
1
2