Panasonic Digital Palmcorder PV-GS70 Operating Instructions Manual page 89

ª Digital Effect Functions
(Camera Mode)
≥It is not possible to use [MULTI], [P-IN-P], [WIPE],
[MIX] or [TRAIL] of [EFFECT1] together with the
digital modes of [EFFECT2] on the
[DIGITAL EFFECT] Sub-Menu.
≥If you set [EFFECT1] on the [DIGITAL EFFECT]
Sub-Menu to [GAIN UP], you need to adjust the
focus manually. However, you cannot adjust the
shutter speed and cannot select White Balance.
≥You cannot use Sports Mode, Portrait Mode or
Low Light Mode with Gain up Mode [GAIN UP].
≥If [EFFECT2] on the [DIGITAL EFFECT]
Sub-Menu is set to [B/W] or [SEPIA], the selected
White Balance Mode cannot be changed.
≥Setting the Cinema Mode cancels the Picture-in
Picture Mode and the Multi-Picture Mode.
In the following cases, using the [EFFECT1] on
the [DIGITAL EFFECT] Sub-Menu is not
possible.
≥When [PROGRESSIVE] is set to [ON]
≥When the MagicPix Mode is set
In the following cases, using the Digital Effect
Function is not possible.
≥Card Mode
≥Title In
Wipe Mode and Mix Mode (l 41)
If either one of the following operations is carried
out, stored images will be erased, and Wipe and Mix
Functions cannot be used.
≥Use the Camera Search Function.
≥Press the [STILL] Button.
≥Switch the [TAPE/CARD/CARD MODE] Selector.
P-IN-P Mode (l 41)
≥If the Palmcorder power is turned off, the smaller
picture will disappear.
≥A title cannot be inserted into the smaller picture.
Multi-Picture Mode (l 42)
≥When [PROGRESSIVE] on the
[CAMERA SETUP] Sub-Menu is [ON],
Multi-Picture Mode cannot be used.
≥If the [MULTI] Button is pressed while
self-recording Mirror mode (l 29) is used, the still
picture is displayed from the upper right corner of
the screen, but, in reality, the picture is recorded
from the upper left corner as usual.
≥The quality of images recorded in Multi Mode
deteriorates slightly.
≥Multi Mode cannot be used in still picture mode.
≥The top and bottom of the Multi pictures will be cut
off slightly.
(l 40)
ª Listening to Playback Sound
Through Headphones
If you want to listen to the playback sound of a tape
through headphones, set [AV JACK] on the [AV IN/
OUT SETUP] Sub-Menu to [OUT/PHONES] and
connect the headphones to the [PHONES] Jack on
this Palmcorder. In this case, no sound (including
warning sounds and shutter sounds) will be
reproduced through the built-in speaker of the
Palmcorder. When the A/V Cable is inserted into the
AV Jack, the internal speaker works.
ª Selecting the Sound during
Playback
(l 43, 51)
You can select the sound by using the [AUDIO OUT]
on the [PLAYBACK FUNCTIONS] Sub-Menu.
STEREO: Stereo Sound (main sound and
subsound)
L: Left channel sound (main sound)
R: Right channel sound (sub sound)
≥If you dub a tape recorded at the [12bit] selected
as the [AUDIO REC] setting, playback sound
becomes stereo sound regardless of whether
[12bit AUDIO] is set to [MIX] or to [AUDIO OUT].
ª Playback Zoom Functions
≥You cannot adjust volume with the Remote
Controller in Playback Zoom Mode.
≥If you turn off the Palmcorder, or if you switch from
VCR Mode to Camera Mode, Playback Zoom
Mode is automatically cancelled.
≥Even if Playback Zoom Functions are being used,
images that are output from the DV Terminal or
Digital Still Picture Terminal are not enlarged.
≥As you enlarge an image, the quality of image
suffers.
≥During the Playback Zoom Function, the Variable
Speed Search Function cannot be used with the
Remote Controller.
ª Index Search Functions
≥Index Search may not be possible at the beginning
of tape.
≥Because PhotoShot Index Signals are not
recorded on still pictures recorded in Continuous
PhotoShot Mode, the PhotoShot Index Search
Function cannot be used for these still pictures.
≥Scene Index Search may not function properly if
the interval between 2 scene index signals is
shorter than 1 minute.
≥For the still pictures taken in the Continuous
PhotoShot Mode or Digital Still Picture Mode,
PhotoShot index signals are not recorded.
89
(l 46)
(l 47)