Panasonic Digital Palmcorder PV-GS70 Operating Instructions Manual page 92

ª Card Playback
≥If a blank (nothing recorded) Card is played, the
screen becomes white and the [NO PICTURE],
[NO MPEG4 DATA] or [NO VOICE DATA]
Indication appears depending on the mode
selected.
≥If you attempt to play back if file recorded in a
different format or if file data is defective, the [k]
Indication and the [CARD ERROR] Indication
could appear as a warning.
≥When the pictures recorded by another
Palmcorder are played back with this Palmcorder,
the size of the pictures may be different from the
recorded size.
≥This Palmcorder can also play back the
Mega-Pixel still pictures up to 2560k1920 size
recorded with the other equipment. However it
takes longer than usual time, and the picture may
not be playable.
≥When playing back a nonstandardized file, the
Folder-File Number may not be displayed.
≥When playing back the MPEG4 moving picture
with fast moving subject or zooming operation, the
image seems to stop momentarily, or a mosaic like
pattern may appear. This is not a malfunction.
≥MPEG4 data or Voice data will not be output from
DV Terminal.
≥MPEG4 data cannot perform Cue/Review
Playback, Slow Motion Playback (forward direction
and reverse direction), Still Advance Playback
(forward direction and reverse direction) or Jog
Playback.
≥During automatic copying of tape pictures onto a
card, the remaining number of pictures that can
still be recorded on the Card is displayed. When it
becomes [0], the tape is set to the Recording
Pause Mode.
≥For the MPEG4 moving pictures recorded on a
camera other than this camera, "k" may be
displayed when they are played back. If the [1]
Button is pressed in this case, "!" will be
displayed for a few seconds and the next image
will be displayed.
≥For the still images recorded on the camera other
this camera, the mega-pixel image size may be
displayed.
≥If an MPEG4 motion picture is played continuously
for a long time, the playback may stop in the
midway and the Palmcorder may freeze while a
still picture is being displayed. If this happens,
press the [RESET] Button.
(l 57)
≥When performing Cue or Review Playback of
voice data, the Playback elapsed time may not
correspond to the actual recording time of the
sound.
≥When playing back an MPEG4 or voice data
recorded by other equipment, a part of the
playback elapsed time may be indicated as [--].
ª Voice Power Save
≥Voice Power Save Function automatically shuts off
the monitor to reduce the power consumption
when no operation is being performed in the Voice
Recording Mode. When [VOICE POWER SAVE]
on the [OTHER FUNCTIONS1] Sub-Menu on the
[CAMERA FUNCTIONS] Main-Menu, or on the
[OTHER FUNCTIONS] Sub-Menu on the
[CARD FUNCTIONS] Main-Menu, is set to [ON],
the power save function is activated, and the
screen turns off in a few seconds after operations,
such as play or recording, are performed.
≥The Voice Power Saving Function is cancelled
when any operation is performed.
≥Do not forget to turn off the power.
ª Copying Pictures from a Memory
Card to a Cassette
≥When recording the Card Image on a Tape, its size
is transformed into 720k576 according to the DV
format.
≥If you attempt to record a still picture with a large
image size on a Tape, there may be a reduction in
the quality of the image.
≥When recording the Card Images on a Tape, a
PhotoShot index signal is automatically recorded
with a picture.
≥Even if you edit the Slide Show, it is not applied to
the order in copying the pictures.
≥Moving Picture (MPEG4) and Voice data cannot
be recorded from a Card to tape.
ª Slide Show
≥The playback time can be set from 7 to
99 seconds for [
and from 5 to 99 seconds for other sizes.
≥Perform the Slide Show Settings with your own
Palmcorder.
≥Depending on the File size, playback may take
longer than the set time.
≥When performing the preset Slide Show after the
Titles are displayed, the Titles disappear.
92
(l 24)
(l 60)
(l 61)
] and [ ] sized pictures,
QXGA UXGA