Formatting A Memory Card; Dpof Setting - Panasonic Digital Palmcorder PV-GS70 Operating Instructions Manual

1, 2
WB/SHUTTER
IRIS/MF/VOL/JOG
MENU
PUSH
1
NOW FORMATTING
1, 2, 3, 4, 5
WB/SHUTTER
IRIS/MF/VOL/JOG
MENU
PUSH

DPOF SETTING

(PRINT QUANTITY)
2
PUSH MENU TO EXIT

Formatting a Memory Card

If a Memory Card becomes unreadable by the Palmcorder,
formatting it may make it reusable. Formatting will delete all the data
recorded on a Memory Card.
After setting the Palmcorder to Card Playback Mode (l 57).....
1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[CARD FORMAT] >> [YES].
2
Select [YES] and press the [PUSH] Dial.
≥During formatting the [NOW FORMATTING] Indication
≥When the formatting is completed, the screen becomes white.
≥For other notes, see page 93.
~~~~~~~~~~~~~~~~~~~~~~
DPOF Setting
You can select the images to be printed, the number of prints, and
other print-related information (DPOF setting) on a Memory Card.
"DPOF" stands for Digital Print Order Format, and since printing data
can be added to images on the Memory Card, the Memory Card can
be used with any printers that support DPOF.
After setting the Palmcorder to Card Playback Mode (l 57).....
1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[DPOF SETTING] >> [YES].
2
Rotate the [PUSH] Dial to select [VARIABLE] and then
press it.
≥When printing one each of all the pictures, select [ALL 1]; if not
all the pictures are to be printed, select [ALL 0].
3
Rotate the [PUSH] Dial to select the picture and then
press it.
4
Rotate the [PUSH] Dial to set the number of prints
and then press it.
≥The framed images will be set to DPOF and the [¥] mark
will be displayed. The [¥] mark indicates pictures for which 1 or
more prints have been set. (l 83)
1
5
Repeat Step 3–4 to set other pictures, and press the
[MENU] Button when the setting is completed.
To Verify DPOF Setting
Select [VERIFY] in Step 2 above. The pictures for which 1 or more
prints are set in DPOF are played back continuously.
≥
Print mark is based on DPOF (Digital Print Order Format).
≥The same setting can be performed using the short-cut menu
(l 26).
≥The number of prints can be set from 0 to 99.
≥Perform DPOF setting on the Palmcorder you are using.
≥It may take some time to verify the DPOF setting. Please wait until
the [ACCESS] Lamp goes off.
66
1
appears.
1
2