Dvd Connections - Panasonic NV-VP30 Operating Instructions Manual

DVD Connections

AUDIO IN VIDEO
R L
IN
Amplifier or TV set
(example)
red white yellow
VCR/DVD OUT
AUDIO VIDEO
R L
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
Rear of
VCR/DVD
R L
OPTICAL AUDIO VIDEO
DVD OUT
Optical digital
audio cable
OPTICAL
Amplifier (example)
Push in the jack all
the way into the
socket with this side
facing up.
Direct DVD audio/video output
Independently of the VCR/DVD sockets you can connect all DVD sockets to a respective
external unit.
A disc is played by the DVD player using the DVD OUT sockets. At the same time the
video recorder is able to record or play back another programme.
Connect the analogue audio output (L/white and R/red) with a "Dolby Pro Logic amplifier",
for example.
To avoid sound quality problems, deactivate function Advanced Surround when you
connect an amplifier with Dolby Pro Logic functionality (page 36).
S-VIDEO output
Connecting the video recorder to the TV set with the S-VIDEO socket results in a higher
picture quality compared to the connection via VIDEO OUT socket (only for DVD OUT).
S-Video
S VIDEO
Digital connectors (OPTICAL)
For optimum surround sound, connect a digital amplifier or a digital audio component.
To play programmes with a 5.1-channel surround sound, connect the digital audio output
(OPTICAL) with an external "Multi-channel Dolby Digital Decoder", for example.
Prerequisites for making recordings with an external digital recorder
The original disc must not be copy-protected.
The recorder must be able to process signals with a scanning frequency of
48 kHz/16 bit.
You cannot make recordings from MP3/WMA originals.
Adapt the settings of SETUP menu Audio (see page 40) to the following:
PCM Down Conversion : Yes
Dolby Digital
DTS Digital Surround
MPEG
Deactivate function Advanced Surround (see page 36).
S-VIDEO IN
Amplifier or TV set
(example)
: PCM
: PCM
: PCM
:
9