General Playback - Panasonic NV-VP30 Operating Instructions Manual

General playback

TV
VCR DVD
Position memorized
Position cleared
26
Playback
OPEN/CLOSE
Place the disc on the disc tray.
The label
PLAY
must face
up.
The player may take some time to read all of the disc information!
MP3, WMA, CD-Text : outputs some track information to the TV screen.
SUBTITLE to display/quit the track information on TV screen.
To pause playback
PAUSE
PLAY
Frame-by-frame
In pause mode, press remote control buttons
takes the film a single frame forwards or backwards. Keeping one of these buttons
pressed continuously displays the next single frame in the chosen direction.
You can also use button
VCDs do not support a backward motion by single frames.
POSITION MEMORY
Using the Position Memory function playback will be resumed at a stored position.
The position tag is retained when you change discs or when the unit goes into standby
mode. You can tag and directly access up to 5 discs. This function is available only if
the elapsed playback time is displayed when playing the disc.
POSITION MEMORY during playback.
The "Position memorized" box will be displayed.
You can now press
PLAY
and the position tag will be cleared.
Some discs do not fully support all of this function.
opens the disc tray.
closes the disc tray and automatically starts playing back the disc.
during playback.
resumes playback.
to move the film forward a single frame at a time.
to go into standby mode or change discs.
to replay the disc again. Playback will be resumed at the stored position
DVD-V DVD-A RAM VCD CD MP3
To stop playback
STOP twice one after the other.
See page 7 "Resume function"
DVD-V
. Every push of one of these buttons
DVD-V RAM VCD CD MP3
DVD-A
Hi hMAT WMA WMA
WMA WMA WMA WMA WMA JPEG g
DVD-A RAM VCD
WMA WMA WMA WMA WMA JPEG Hi hMAT WMA WMA
g