Before Requesting Service - Panasonic NV-VP30 Operating Instructions Manual

Before requesting service

The loudspeakers emit
loud noise:
The message "NO PLAY" appears:
The OSD displays are cut off
along their top edge:
The player does not respond
to function key commands:
Playback does not start after
pressing PLAY:
Unable to change audio track
or subtitle languages:
The subtitles are not shown:
The language selected from the menu
is not used for the audio track or
subtitles:
Unable to change the aspect angle:
You have forgotten your password:
46
DVD DISTORTIONS
Go to the SETUP screen and check the Audio menu settings of "Dolby Digital","DTS Digital
Surround" and "MPEG".
The player cannot play discs of the current format.
The disc contains no recorded material.
Child lock is enabled.
Move the display position down.
Certain control operations are not available with some discs.
Interference caused by lightning or static charge. Press [
Restart the player.
Condensation has accumulated inside the player. Wait for 1 to 2 hours.
The player only supports DVDs with regional code "2", "All" or from a group of regional codes
containing regional code "2".
The disc is dirty.
The disc is in the wrong way round. The label of the disc you wish to play must face up.
You can only choose from the languages actually recorded on the disc.
Some discs require you to change languages via the disc menu.
The disc does not provide any subtitles.
You deactivated the display of subtitles.
The subtitles are output to the wrong position. Move the position of subtitles.
The disc does not provide the language you selected.
It depends on the disc whether this function is available.
Stop the player and keep pressing player button
"INIT" disappears from the screen. This will restore all factory defaults. When you are done switch off the
unit and back on afterwards. You will afterwards have to go to the QUICK SETUP menu (page 25) to set
up the basic settings again.
] to put the player into standby mode.
together with (DVD area) and DVD until