Dvd Connections - Panasonic NV-VP30EB Operating Instructions Manual

DVD Connections

AUDIO IN VIDEO
R L
IN
Amplifier or TV set
(example)
red white yellow
VCR/DVD OUT
AUDIO VIDEO
R L
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
Rear of
VCR/DVD
R L
OPTICAL AUDIO VIDEO
DVD OUT
Optical digital
audio cable
OPTICAL
Amplifier (example)
Push in the jack all
the way into the
socket with this side
facing up.
Direct DVD audio/video output
Independently of the VCR/DVD sockets you can connect all DVD sockets to a respective
external unit.
A disc is played by the DVD player using the DVD OUT sockets. At the same time the
video recorder is able to record or play back another programme.
!
Connect the analogue audio output (L/white and R/red) with a "Dolby Pro Logic amplifier",
for example.
!
To avoid sound quality problems, deactivate function Advanced Surround when you
connect an amplifier with Dolby Pro Logic functionality
S-VIDEO output
Connecting the video recorder to the TV set with the S-VIDEO socket results in a higher
picture quality compared to the connection via VIDEO OUT socket (only for DVD OUT).
S-Video
S VIDEO
Digital connectors (OPTICAL)
For optimum surround sound, connect a digital amplifier or a digital audio component.
To play programmes with a 5.1-channel surround sound, connect the digital audio output
(OPTICAL) with an external "Multi-channel Dolby Digital Decoder", for example.
Prerequisites for making recordings with an external digital recorder
!
The original disc must not be copy-protected.
!
The recorder must be able to process signals with a scanning frequency of
48 kHz/16 bit.
!
You cannot make recordings from MP3/WMA originals.
Adapt the settings of SETUP menu Audio (see page 44) to the following:
!
PCM Down Conversion : Yes
!
Dolby Digital
!
DTS Digital Surround
!
MPEG
Deactivate function Advanced Surround (see page 57).
S-VIDEO IN
Amplifier or TV set
(example)
: PCM
: PCM
: PCM
(page 57).
:
15