Vcr Auto Setup - Panasonic NV-VP30 Operating Instructions Manual

VCR AUTO SETUP

Country
Belgien
Italia
Belgique
Nederland
België
Norge
Danmark Österreich
Espa a ñ Deutschland
ÅëëÜäá Portugal
France
Suomi
: select ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER : access
: exit
EXIT EXIT EXIT EXIT EXIT EXIT EXIT EXIT
DVD QUICK SETUP must follow
the VCR AUTO SETUP for
the DVD player (page 25).
Clock set
MANUAL
Time : 12 : 00 : 00
Date : 11. 6. 03
10
VCR AUTO SETUP with connection of a 21-pin scart cable
TV
DVD
VCR
Switch on the TV set.
Select VCR of the VCR/TV/DVD switch.
Sverige
Press the Standby/On button to switch on the VCR/DVD player.
Schweiz
Suisse The Country menu will be displayed.
Svizzera
Use the arrow keys
ENTER
others
Press ENTER to confirm.
The VCR starts the automatic tuning. (The search will take approx. 5 min. to be completed)
If the Country menu does not appear after switching on you can manually restart
Automatic Tuning (page 20).
VCR AUTO SETUP with connection via the RF coaxial cable
If you decide to just use the RF coaxial cable to connect the TV set you must adjust
the video output channel with the TV set's input channel.
Switch on the TV set.
Select VCR of the VCR/TV/DVD switch.
Press the Standby/on button to switch on the VCR/DVD player.
Press the MENU button for approx. 7 seconds. The preset channel appears on the
display.
Tune the TV set until the test pattern appears. If there is any interference select
another channel for the TV set and VCR/DVD player.
Press the CH button to change the channel (e.g. to channel 39).
Tune the TV set until the test pattern appears.
Press ENTER to confirm.
If the clock setting menu appears
Normally date and time are set due to programme transmission. Otherwise you have
to manually set date and time.
Use
Mind that a wrong date or time will influence the programmed recording of
TV programmes (don't forget to change to DST and back).
to select your country.
...
or to enter Time and Date, ENTER will store the information.
1 2 3 0
TRACKING/V-LOCK
CH