Timer Recording - Panasonic NV-VP30 Operating Instructions Manual

Timer recording

TV
VCR DVD
Timer recording
Pos Date Start Stop
1 ARD 31/12 10:30 11:30 SP ON
1 ARD 31/12 11 :30 12:30 SP ON
2 ZDF 31/12 12:30 13:30 SP ON
4 RTL 31/12 13:30 14:30 SP ON
6 VOX 31/12 14:30 15:30 SP ON
- - - - - - - -/- - - - : - - - - :- - SP - - -
select ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER store
: :
CANCEL CANCEL CANCEL CANCEL CANCEL CANCEL CANCEL CANCEL EXIT EXIT EXIT EXIT EXIT EXIT EXIT EXIT
delete exit
: :
12
The Timer recording allows you to programme the recording time of TV programmes up
to 1 month in advance. Use the on-screen menu to programme a maximum of 16
recordings.
PROG/CHECK
Press PROG/CHECK to select an available memory location
1 / 3
Press ENTER to confirm
VPS
PDC
First select the respective station
Enter start and stop time
Keep the buttons pressed to change the time in 30-minute steps.
Set the tape speed: A (Automatic), SP, LP, EP
Press
TIMER
Press ENTER to save the timer programme.
Repeat these steps for further recordings you may wish to programme.
Press TIMER to activate the recorder's timer mode.
Ensure that the VCR symbol
Do not forget to verify that there is enough tape remain. The length of the
recording must not exceed the time remain on the video cassett
Quitting the timer mode
Press TIMER, the VCR symbol
TIMER
You can now play back a cassette or make a manual recording.
Press TIMER again to reactivate the timer programme
Displays the timer programmes for verifications
TIMER CHECK
Repeatedly press the button to view the details of the timer programmes on the VCR
display.
, then use
,
or the VPS/PDC button to change the VPS/PDC setting
is displayed.
turns off.
.
to set date, week or day of week
,
e.
you entered previously.
(button on the unit only)
.