Table of Contents
Advertisement
Timer Recording
Ready Checklist
All connections are made. (pp. 12 ~ 15)
TV and DECK are plugged in.
Clock set correctly. (p. 18)
Tape has record tab intact. (p. 6)
Remote is in VCR mode. (Press VCR.)
(➛ ➛ ➛ ➛ ➛ The VCR mode Light-up Indicator lights on DECK.)
Sufficient tape remaining for recording time.
1
Press PROG*
to display Program.
2
Example
Today
14
31
1
12
DAILY
SELECT
/
WEEKLY
(SU)
Selection Order
13
WEEKLY
(MO)
WEEKLY
(SA)
3
24
AG-VP320-3(VCR)_24-35.p65
1) Press .
2) Set record DATE,
press
to select:
1~31= one time, or
DAILY=Monday~Friday,
or WEEKLY= same time
each week.
• See selection order left.
3) Set remaining items,
press SET
to set START/ STOP
times, CH (channel) or
LINE input (p. 35), and
tape speed (SP, SLP).
Then press
to select.
Press PROG
to end programming.
To Enter More Programs,
press
to select and
press SET
to set an unused program
number, and then repeat
step 2.
Or
Press PROG
to exit.
• When timer is set, the TIMER Light-up Indicator lights on DECK.
• When timer recording starts, the VCR REC Light-up Indicator lights on
DECK.
• You can set Timer Recording with the power on or off.
• "TIMER REC WILL START SOON" appears on-screen for 2 minutes before
Timer Recording starts. If DECK is in DVD mode, no message appears, but
the VCR REC Light-up Indicator will flash.
24
POWER
ADD/DLT
SELECT
SET
VCR
PROG
VCR mode Indicator
Light-up Indicators
TIMER Indicator
VCR REC Indicator
2005/05/18, 16:11
Advertisement
Table of Contents
