Using A Handset As A Room Monitor - Siemens Gigaset C200 Instructions Manual

(C 250 only)
Picking up a call
If the call is not taken at the called handset when Call Director is activated, you can pick
it up at another handset by pressing the Talk/Handsfree key
indicated at that handset.

Using a handset as a room monitor

With this function, a previously stored internal or external number is called when a set
noise level in the room is reached (the baby cries). When you answer the call you hear
the noise in the baby's room. The room monitor remains activated on the handset even
after you hang up.
The handset should be between 1 and 2 metres away from the baby. The microphone
must be directed towards the baby.
When the room monitor is activated, incoming calls to the handset which is near the
baby are indicated without a ring tone, they are just shown on the display. When enter-
ing an external phone number, make sure that the line to which you want the room
monitor to be transferred is not blocked by an activated answering machine.
Always check the settings of the room monitor before you leave
W
home, e.g. sensitivity and phone line.
If you redirect your room monitor to an external number, then you
N
should tell that number's owner.
A room monitor stops calling an external number after around
N
90 seconds. Room monitor call times to an internal number
i
(handset) are unlimited.
The room monitor function severely curtails the handset's operating
N
time. If necessary you should place the 'room monitor handset' in the
charger to ensure that the battery does not run down.
Using several handsets
c
. The call is only visually
83