Opening Lists With The Message Key - Siemens Gigaset C200 Instructions Manual

Using the directory and other lists

Opening lists with the Message key

You can use the Message key
1. Text message list (if several mailboxes are set up, they will all be listed),
2. Answering machine list (C 250 only),
3. Messages in the network mailbox (if your network provider supports this function
and the network mailbox is configured for fast access, page 72),
4. Calls list.
As soon as a new entry (a text message, a message on the built-in answering machine
(C 250 only) and/or a call) arrives in one or more of the lists, the
hear an advisory tone. If you now press the flashing
the lists but instead close the menu, the
If you press the flashing
key will stop flashing even if one of the other lists still contains new entries. If there is
at least one new entry, you can set the
let others, e.g. members of your family/your office colleagues, know that they have
received new messages.
The following lists are displayed when you press
If only one list has new entries, the first new entry on that list is displayed; if the
N
entries are in a personal mailbox (page 51), then the appropriate list is displayed.
If several lists have new entries, those lists are offered for your selection.
N
If there are no new messages in any of the lists, then all the lists are offered for your
N
selection.
If calls are stored in the network mailbox, you will see a message if the correct set-
N
ting has been made (refer to the network mailbox operating instructions).
Setting the Message key to 'flashing'/deactivating the Message key
Precondition: There is still one new entry in one of the lists.
[__________] [_____________________________________________________________]
Set MWI-LED
The key only flashes until it is pressed again and a list or list entry is opened.
34
f
to open the following lists:
f
key continues to flash.
f
key and open one of the lists, when you close the list the
f
key 'flashing' again, i.e. reactivate it. This will
Open the calls list.
Select the menu item and confirm.
[_________ ]
OK
Long press (back to idle status).
f
key flashes and you
f
key but you do not open any of
f
: