Siemens Gigaset C200 Instructions Manual page 55

SMS (Text Messages)
[_______________]
MENU
[_____________________________________________________________] [__________]
SMS
[__________] [_____________________________________________________________]
Settings
[__________] [_____________________________________________________________]
SMS Mailboxes
[__________] [_____________________________________________________________] SMS 2
[_____________________________________________________________] [__________]
Activate SMS Mailbox
[_______]
OK
[__________] [_____________________________________________________________]
Box-ID:
[_________] [_________]
OK
[__________] [_____________________________________________________________]
SMS PIN Protection
[_______]
OK
[_______]
OK
If you operate a number of devices (bases) with SMS functionality on a
i
single phone line, then each SMS mailbox ID may only occur once. In this
case you must also change the preset ID of the general mailbox.
To find out how to change the PIN, turn to page 53. If you have forgotten your PIN, you
can reset it by restoring the factory settings of the base. This will delete all messages
from all mailboxes.
When you deactivate a mailbox, messages sent to that box will be lost. The messages
stored for that box are deleted.
If you deactivate the PIN protection, the PIN is reset to 0000.
52
Press the display key to open the menu.
Confirm.
OK
Select the menu item and confirm.
[_________ ]
OK
Select the menu item and confirm. Activated mail-
boxes are checked
[_________ ]
OK
Select and confirm, e.g. SMS 2.
[_________ ]
OK
Activate/deactivate the mailbox:
Confirm to activate or deactivate the mailbox
OK
‰
( = On).
SMS 2
t s
Confirm.
Assign an ID to a mailbox:
Select the menu item and confirm.
[_________ ]
OK
Select a number from the available ID's and confirm.
Press the 'end call' key briefly to return to the previ-
ous menu level.
Activate/deactivate PIN protection for a mailbox:
Select the menu item and confirm (
[_________ ]
OK
Enter PIN and confirm.
Re-enter PIN and confirm.
Long press (back to idle status).
‰
.
U
‰
OK
‰
= On).