Using A Handset As A Room Monitor - Siemens Gigaset SL 100 User Manual

Playing/deleting (SL 150 only) a Call Director announcement
v
¢
Base Settings
either ...
s
Play Announce
or ...
s
Del Announce
[RRRRRRRRRRRRRRRRRRRRR]
Yes
s
If you want, you can switch the loudspeaker on during playback by
◆
pressing the d key.
i
While playing the announcement, press display key
◆
record it again.
Picking up a call (SL 150 only)
If the call is not taken at the called handset when Call Director is activated, you can pick
it up at another handset by pressing the talk key c. The call is only visually indicated at
that handset.

Using a handset as a room monitor

With this function, a previously stored internal or external number is called when a set
noise level in the room is reached (the baby cries). When you answer the call you hear
the noise in the baby's room. The room monitor remains activated on the handset even
after you hang up.
The handset should be between 1 and 2 metres away from the baby. The microphone
must be directed towards the baby.
When the room monitor is activated, incoming calls to the handset which is near the
baby are indicated without a ring tone, they are just shown on the display. The display
and the key pad are not illuminated.
When entering an external telephone number, make sure:
The handset in the baby's room is not barred for outgoing calls.
◆
The number to which the alarm calls is sent is not blocked by an activated answering
◆
machine.
Always check the settings of the room monitor before you leave
W
home, e.g. sensitivity and phone line.
¢
Call Director
Play the announcement:
Select the menu item and confirm.
OK
Deleting the announcement:
Select the menu item and confirm.
OK
Press the display key to confirm the prompt.
Long press (back to idle status).
Using several handsets
if you want to
New
75