Siemens Gigaset C200 Instructions Manual page 65

Using the answering machine in the C 250 Base
Playing messages
The date and time of arrival of each message is logged (provided this function is set,
page 15). If Calling Line Identification is activated, then the caller's number or name is
displayed.
New messages that have not yet been played are indicated by a message in the display,
ö
by the key flashing on the base and the
f
Pressing starts the playback with the first new message. If there are no new mes-
sages, the old messages are played back. After the last new message, the old ones are
played back. You now hear the end tone.
Once they have been played, new messages are added to the list after the old ones.
If you want to listen again to messages you have already played, you must select the
answering machine list.
[__________] [_____________________________________________________________]
Answering Mach.: 01+02
Stop and skip forward/back during playback
either ...
[______________]
MENU
[_____________________________________________________________] [__________]
Continue
[_________ ]
[________]
2 x
[_________ ]
[________]
2 x
or ...
The loudspeaker activates. You hear the ready tone (a short tone). Now speak the com-
mand Back or Forward (page 66).
The answering machine reverts to idle status if playback is interrupted for
i
more than a minute.
62
f
Open calls list/answering machine list.
Select the menu item and confirm. The playback
starts.
[_________ ]
OK
The loudspeaker activates.
1. Using the keypad:
Stop playback:
Stop playback:
Confirm to continue.
OK
Skip forward and back:
To the start of the current message.
To the previous message.
To the next message.
To the next message but one.
2. Using voice prompts (page 66):
Press the top half of the key and hold.
key flashing on the handset.