Sharp UX-310 Operation Manual page 42

Sending a Fax by Automatic Dialing
Storing fax and telephone numbers for Automatic Dialling
1
Press these keys:
The display will show:
2
Press 1 to select SET.
The display will show:
3
Enter a two-digit Speed Dial number by pressing the number keys
(01 to 05 for Rapid Key Dialling, 06 to 45 for Speed Dialling).
4
Enter the fax or voice number by pressing the number keys (max. of
32 digits including pauses).
Press the SPEED DIAL key to clear a mistake.
If a pause is required between any of the digits to access a special
service or an outside line, press the REDIAL key. The pause will
appear as a hyphen. Several pauses can be entered in a row.
If you are on a PBX, do not enter the access code for the public
line. If the number is within your PBX, enter an R before the
number.
Press the SEARCH/R key to enter a space between digits.
5
Press the START key.
40
FUNCTION
3
FAX/TEL # MODE
1
FAX/TEL # SET
ENTER SPEED #
0 1
(Example)
START