Restoring the handset
default settings
You can reset any individual settings
and changes that you have made.
This will not affect entries in the
directory, calls list, date and time or
the handset's registration to the
base.
¤ q Settings ¤
§Menu§
¤ q Handset ¤
¤ q Reset Handset ¤
¤ Reset? ¤
§OK§
Cancel the reset with a.
Setting the base
The base settings are made via regis-
tered handset.
Changing the ringers for
the Gigaset E310A base
u Volume:
Five volume levels (1–5), "Off"
(volume = 0) and Crescendo (vol-
ume increases with each ring) can
be set.
u Melody:
List of pre-loaded ringer melo-
dies. The first three melodies are
the "classical" ring tones.
¤ q Settings ¤
§Menu§
¤ q Base ¤
§OK§
¤ q Audio Settings ¤
¤ q Ringer Volume/
Ringer Melody ¤
¤ q (Select volume/melody)
¤
§OK§
(‰= selected)
§OK§
§OK§
§OK§
§OK§
§OK§
§OK§
Repeater support
You can increase the range and sig-
nal strength of the base using a
repeater. You will need to activate
repeater mode. This will terminate
any calls that are in progress at the
time.
¤ q Settings ¤
§Menu§
¤ q Base ¤
§OK§
¤ q Additional
¤ q Repeater
¤
§OK§
¤
§OK§
(´= activated)
After activating or deactivating the
repeater, switch your handset off
and on again (¢ page 20).
Please note
u Eco Mode / Eco Mode+
(¢ page 40) and repeater sup-
port cancel each other out, i.e.,
if you use a repeater, you can-
not use Eco Mode or Eco
Mode+.
u The default encrypted trans-
mission setting is deactivated
when repeater mode is acti-
vated.
Protecting against
unauthorised access
Protect the system settings of the
base with a system PIN known only
to you. You will need to enter the
system PIN when, for example, regis-
tering/de-registering a handset to/
from the base.
Setting the base
§OK§
49