Resetting The Base To The Default Settings - Gigaset E310 User Manual

Setting the base
Changing the system PIN
You can change the base's 4-digit
default system PIN ("0000") to a 4-
digit PIN known only to yourself.
Gigaset E310A: Setting a system PIN
enables remote operation of the
answering machine (¢ page 38).
¤ q Settings ¤
§Menu§
¤ q Base ¤
§OK§
¤ q System PIN ¤
¤ PIN: (Enter current system PIN)
¤ ¤ New PIN: (Enter new
§OK§
system PIN) ¤
§OK§
Resetting the system PIN
If you have forgotten your system
PIN, you can reset the PIN to the
original code 0000 using the but-
ton on the base. This will also reset
other settings; see the section enti-
tled "Resetting the base to the
default settings".
Resetting the base to the
default settings
When restoring default settings:
u Individual settings are reset
u All lists are deleted
u Eco Mode and Eco Mode+ are
deactivated.
The date and time are retained.
Please note
The answering machine is ready
for use approx. 15 seconds after
the base has been connected or
reset.
50
§OK§
§OK§
Resetting the base via the menu
When resetting via the menu
u Handsets are still registered
u The system PIN is not reset.
¤ q Settings ¤
§Menu§
¤ q Base ¤
§OK§
¤ q Base Reset ¤
Resetting the base using the
button on the base
When resetting the base using the
button on the base
u All handsets are de-registered
and
u The system PIN is reset to the orig-
inal code 0000
Proceed as follows:
¤ Remove the mains cable from the
base.
¤ Hold down the registration/pag-
ing key ù on the base (¢ page 2)
while reconnecting the power
cable to the base. Hold the key
down for at least 5 seconds.
Please note
All handsets are de-registered
and must be re-registered. All set-
tings are reset to the default set-
tings.
§OK§
§OK§