Table of Contents
Advertisement
Accepting a call from the
answering machine
You can still accept a call even when
the answering machine has
answered a call or is recording:
¤
¤
§Menu§
Accept
If Call Screening has been deacti-
vated via the handset (see follow-
ing section "Activating/deactivating
call screening") or if Call Screening
is activated meaning the call can-
not be heard on the handset, you
can still accept the call by following
these steps:
u Press the talk key c
u Remove the handset from the
base/charger (if auto answer is
activated, ¢ page 46)
Please note
If Call Screening is activated via
the handset and the call can be
heard on the handset, you can
switch the speaker on and off by
pressing the talk key c.
Recording stops and you can speak
to the caller.
If three seconds of the call have
already been recorded when you
pick it up, the call will be displayed
as a new message.
Activating/deactivating
call screening
While the caller is leaving a message
on the answering machine, you can
listen in via the loudspeaker on the
base or handset.
§OK§
Operating the answering machine
Permanently activating/
deactivating call screening
¤ q Voice Mail ¤
§Menu§
¤ q Call Screening ¤
Handset /Base ¤
Call screening can be simultane-
ously activated on the base and
handset.
Deactivating call screening on
the handset for the current
recording
a
Press the end call key. The
loudspeaker on the hand-
set is deactivated.
Setting up the answering
machine
The answering machine has already
been preset at the factory. You can
configure individual settings via the
handset.
Setting up ring delay
You can set the amount of time that
elapses before the answering
machine is to accept a call.
¤ q Voice Mail ¤
§Menu§
¤ q Ring Delay ¤
q
Select Immediately /
10 sec / 18 sec / 30 sec /
Auto and press
(‰= on).
With Auto the ring delay is as fol-
lows:
u If there are no new messages, the
answering machine answers a call
after 18 seconds.
§OK§
¤ q
§OK§
§OK§
(‰= on)
§OK§
§OK§
§OK§
37
Advertisement
Table of Contents
