Samsung SHR-2160 User Manual page 88

Other PTZ Camera Control Modes perform its control in a single screen. Press the channel
selection button in the left front to select the PTZ setting channel and press the PTZ button.
If you succeed in entering Single Screen PTZ Camera Control Mode, the PTZ symbol on
the screen will turn yellow from white while the PTZ button will turn blue. Single Screen PTZ
Camera Control Mode supports Pan, Tilt, and Zoom operation basically and Preset, Camera
Menu, and other functions additionally.
Press the PTZ button in Live Mode to cancel PTZ Camera Control Mode. After cancellation,
the PTZ symbol on the screen will turn white from yellow while the PTZ button will lose its
blue light.
Note
Note
You cannot use the PTZ device and remote control device at the same time, because of
communication problems
In PTZ control mode, DVR's PTZ mode is canceled when remote control mode is connected,
and the remote control device is disconnected when the DVR changes to PTZ mode while
controlling the DVR with a remote control device.
Refer to the remote control device manual on how to control the DVR's PTZ device in the
remote control device.
6-2
English