Samsung SHR-2160 User Manual page 72

SHR-2160/2162/2080/2082 USER'S MANUAL
Record Rate & Video Size
NTSC
When you press the REC button in the front, it selects the record mode settings.
When calculating the total of recording seconds, the total is based on the highest recording
seconds out of the general recording seconds and event recording seconds.
If you cannot select the desired recording seconds, check the general recording and event
recording seconds.
5-19
English
Record/seconds
Sets the recording frame rate. The frame rate is number of the recorded scenes per sec-
ond.
When setting up to 30ips(NTSC)/25ips(PAL), there are many scenes being recorded every
second therefore the recording is very detailed, and there are no dropped frames when
playing back. This setting is proper for the areas where close monitoring is necessary.
For NTSC, you can set it to 30ips, 15ips, 7.5ips, 3.8ips, 1.9ips, or 0.9ips.
For PAL, you can set it to 25ips, 12.5ips, 6.3ips, 3.1ips, 1.6ips, or 0.8ips.
The record menu is activated by following the camera menu's (menu 5-12) video on/off.
For CIF, the total recording ips is 120ips; and in the case of half D1, it's 60ips. While record-
ing ips functions, if it goes over the determined total, it automatically adjusts the total as the
last channel becomes the lowest ips (0ips).
Video Size
Video Size is displayed on the lower left-land corner.
You may select from CIF or Half D1.
Total/Max (recording ips)
Displays the maximal total recording ips according to the total recording ips and Video Size.
You may set the recording ips based on this setting.
Caution
Caution
PAL