Sequence Time
- When connecting with SHR-2160/2162/2080/2082 in the monitoring mode, set
the auto sequence time if the auto sequence is set. The time can be set from 10
to 20 minutes.
OSD Display
- Sets if OSD shall be displayed on each channel of Smart Viewer.
- Whether you check "Enable" or not, OSD will appear or not.
However, Audio icon, PTZ icon, REC icon, and Alarm/Motion event icon will not
be affected by the OSD condition.
Callback Connection
- Sets the port for Callback connection.
Auto Connection
- Sets if the smart viewer is automatically connected to
SHR-2160/2162/2080/2082 or site at the initial operation.
- If you check "Auto Connection On", the names of SHR-2160/2162/2080/2082
and Site currently registered at the DVR/Site list will be displayed in the
following list. If you select one from the list, the smart viewer will connect to the
selected SHR-2160/2162/2080/2082 or Site when it operates later.
Language
- Sets the language used in the SmartViewer.
9-26
English