Samsung SHR-2160 User Manual page 84

SHR-2160/2162/2080/2082 USER'S MANUAL
Callback Settings
- Though Callback is set to ON, any Callback message will be created unless Alarm, Motion
- Unless the Callback button is clicked, SmartViewer does not receive any Callback message.
5-31
English
The Callback function is used to forward a callback message to the IP where SmartViewer
is in action in case Alarm, Motion Detection, or Video Loss event occurs.
On/Off : Off is default but you may choose On.
IP Address : IP setting is available only when On is selected from On/off Setting.
Select the IP address of PC where SmartViewer is in action.
Port(UDP) : You may choose one from 7900 to 7999 and the number changes by 1.
Selects the Port value for the Callback Connection menu from SmartViewer Setup.
Retrial : You may choose one from 1 to 20 and the number changes by 1.
Caution
Caution
Detection, and Video Loss are set by EventRecord.