Table of Contents
Advertisement
TG6611-6621E(e).book Page 45 Tuesday, December 7, 2010 2:00 PM
Problem
Cause/solution
I cannot operate the
L The remote access code is not set. Set the remote access
answering system
remotely.
L You are entering the wrong remote access code. If you have
L Press each key firmly.
L The answering system is turned off. Turn it on (page 35).
Liquid damage
Problem
Cause/solution
Liquid or other form of
L Disconnect the AC adaptor and telephone line cord from the
moisture has entered the
handset/base unit.
Caution:
L To avoid permanent damage, do not use a microwave oven to speed up the drying process.
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
code (page 34).
forgotten your remote access code, enter the remote access
code setting to check your current code (page 34).
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorised service centre.
Useful Information
45
Hide quick links:
Advertisement
Table of Contents
