Direct Command Operation Using The Handset; Remote Operation - Panasonic KX-TG7100FX Operating Instructions Manual

TG7100-7120FX(e-e).book Page 29 Thursday, August 10, 2006 10:32 AM
Calling back (Caller ID
subscribers only)
If caller information was received for the call,
you can call the caller back while listening to
a message.
1
Press {j/OK} during playback.
2
"Call Back" i {>}
Editing the number before calling back
1
Press {j/OK} during playback.
2
"Edit and Call" i {>}
3
Edit the number. i {C} / {s}
Direct command
operation using the
handset
You can operate the answering system by
pressing dial keys, rather than navigating
through the menus. To use the following
commands, press {j/OK}. i "Answer
System" i {>}
Key Direct commands
Repeat message (during
{1}
*1
playback)
Skip message (during
{2}
playback)
Enter the "Settings" menu
{3}
Play new messages
{4}
Play all messages
{5}
Play greeting message
{6}
Record greeting message
{7}{6}
Turn answering system on
{8}
Stop (recording, playback)
{9}
Turn answering system off
{0}
Erase this message (during
{*}{4}
playback)
Answering System Features (KX-TG7120 only)
Key
{*}{5}
{*}{6}
*1 If pressed within the first 5 seconds of
a message, the previous message will
be played.

Remote operation

Using a touch tone phone, you can call your
phone number from outside and access the
unit to listen to messages or change
answering system settings.
Important:
L In order to operate the answering system
remotely, you must first turn on remote
operation by setting a remote access
code. This code must be entered each
time you operate the answering system
remotely.
Turning remote operation on
A 3-digit remote access code must be
entered when operating the answering
system remotely. This code prevents
unauthorised parties from listening to your
messages remotely. After you store your
remote access code, remote operation is
possible.
1
{j/OK} i "Answer System" i
{>}
2
"Settings" i {>}
3
"Remote Code" i {>}
4
To turn on remote operation, enter a 3-
digit remote access code.
L To turn off remote operation, press
{*}.
5
{j/OK} i {ih}
Direct commands
Erase all messages
Erase greeting message
29