Battery Charge - Panasonic KX-TG7100FX Operating Instructions Manual

TG7100-7120FX(e-e).book Page 9 Thursday, August 10, 2006 10:32 AM
L When replacing batteries, remove the
old batteries positive (S) terminal first.
2
Insert the batteries negative (T)
terminal first. Close the handset cover.

Battery charge

Place the handset on the base unit or
charger for about 7 hours before initial
use.
When charging, the battery icon is shown as
follows.
When the batteries are fully charged, 5
remains on the display.
L The charge indicator lights up when the
handset is placed on the base unit or
charger.
*1
Base unit Charger
Charge
contact
*1 The pictured model is KX-TG7100.
*2 KX-TG7102 only
Note:
L It is normal for the handset to feel warm
during charging.
L If you want to use the unit immediately,
charge the batteries for at least 15
minutes.
L Clean the charge contacts of the handset,
base unit, and charger with a soft, dry
cloth once a month, otherwise the
batteries may not charge properly. Clean
more often if the unit is exposed to grease,
dust or high humidity.
Battery strength
Battery icon Battery strength
High
5
Medium
6
Low
7
When flashing: Needs
to be charged.
Panasonic Ni-MH battery performance
(included batteries)
Operation
In continuous use
In continuous
standby mode
Preparation
*2
Operating time
17 hours max.
180 hours max.
9