Table of Contents
Advertisement
TG7100-7120FX(e-e).book Page 8 Thursday, August 10, 2006 10:32 AM
Preparation
Connections
Base unit
When connecting the AC adaptor to the
base unit, a short beep will be heard. If it is
not heard, check the connections.
(220–240 V, 50 Hz)
To telephone
network
Use only the included AC
adaptor and telephone line
cord.
Charger (KX-TG7102 only)
Connect the AC adaptor to the charger and
route the cable as shown. The charger can
be mounted on the wall, if required.
Hooks
25 mm
Screws
Use only the included AC adaptor.
8
Note:
L Never install telephone wiring during a
lightning storm.
L The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
Hook
disconnected.
Location
L For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances such as
TVs, radios, personal computers or
other phones.
– in a convenient, high and central
location.
Battery
installation/replacement
Important:
L Use only the included rechargeable
batteries noted on page 4, 5.
L When replacing batteries, we recommend
using the Panasonic rechargeable
batteries noted on page 4, 5.
1
Press the notch on the handset cover
(220 – 240 V,
firmly and slide it in the direction of the
50 Hz)
arrow.
Hide quick links:
Advertisement
Table of Contents
