Direct Command Operation Using The Handset; Remote Operation - Panasonic KX-TG7200TW Operating Instructions Manual

TG7200-7220TW(e-e).book Page 25 Wednesday, April 25, 2007 4:49 PM
2
{^}/{V}: "Answer System" i
{>}
3
{^}/{V}: "Erase Message" i
{>}
4
{^}/{V}: "Erase All" i {>}
5
{^}/{V}: "Yes" i {>} i {ih}
Calling back (Caller ID
subscribers only)
If caller information was received for the
call, you can call the caller back while
listening to a message.
1
Press {j/OK} during playback.
2
{^}/{V}: "Call Back" i {>}
Editing the number before calling
back
1
Press {j/OK} during playback.
2
{^}/{V}: "Edit and Call" i
{>}
3
Edit the number. i {C}
Direct command
operation using the
handset
You can operate the answering system
by pressing dial keys, rather than
navigating through the menus.
To use the following commands:
{j/OK} i {^}/{V}: "Answer
System" i {>}
Key Operation
Repeat message (during
{1}
*1
playback)
Skip message (during
{2}
playback)
Answering System Features
Key Operation
Enter the "Settings"
{3}
menu
Play new messages
{4}
Play all messages
{5}
Play greeting message
{6}
Record greeting
{7}{6}
message
Turn answering system
{8}
on
Stop (recording,
{9}
playback)
Turn answering system
{0}
off
Erase currently playing
{*}{4}
message
Erase all messages
{*}{5}
Erase greeting message
{*}{6}
*1 If pressed within the first 5
seconds of a message, the
previous message will be played.

Remote operation

Using a touch-tone phone, you can call
your phone number from outside and
access the unit to listen to messages or
change answering system settings. The
unit's voice guidance will prompt you to
press certain dial keys to perform
different operations.
Important:
L In order to operate the answering
system remotely, you must first turn
on remote operation by setting a
remote access code. This code must
be entered each time you operate the
answering system remotely.
25