Compressor Specifications; Initial Assembly - Central Pneumatic 95630 Set Up And Operating Instructions Manual

Symbology
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
A
Amperes
No Load Revolutions per Minute
n 0 xxxx/min.
(RPM)
WARNING marking
concerning Risk of Eye Injury.
Wear ANSI-approved safety
goggles with side shields.
Read the manual before set-up
and/or use.
WARNING marking concerning
Risk of Hearing Loss.
Wear hearing protection.
WARNING marking concerning
Risk of Fire.
Do not cover ventilation ducts.
Keep flammable objects away.
WARNING marking concerning
Risk of Electric Shock.
Properly connect power cord to
appropriate outlet.
Page 8 For technical questions, please call 1‑800‑444‑3353.
Description
Functional Description

Compressor Specifications

Type Single cylinder, oiless piston
Power 1/5 HP
Voltage 120, 60HZ, 1.18 AMP
Thermo-Overload
Auto shutoff
shutoff protection
Air output 0 - 58 PSI
Air outlet size 1/8 - 27 NPT male threads
Motor RPM 1750
Pressure Gauge 0-100 PSI
Cord length 6'-2 1/2"L
Air Brush Specifications
Working Air
0.5 CFM @ 20 PSI
Pressure
Air Hose length Approx. 5FT
Housing Anodized Aluminum
22cc Glass jar assembly
Accessories 5cc Metal cup
Metal Hanger

INITIAL ASSEMBLY

Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
Note: For additional information regarding
parts listed in following pages, refer to
Assembly Diagrams near end of manual.
Unpacking
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
SKU 95630