To Select Connected Equipment; Vga Menu - Philips FTR9964 User Manual

w
w
B
TV VCR DVD SAT
TAPE CD TUNER CDR
b S Ì
MOVIE SPORT CHILD NEWS OTHER
b
æ
j
S
Picture 1
G Brightness,
H Contrast,
è Color temperature,
@ Sharpness,

To select connected equipment

Equipment connected with an aerial cable only :
Select the programme number under which you have stored the test signal
with the digit keys.
Equipment connected to a euroconnector, to the
connector or to the front side of the receiver box
Press the w key repeatedly to select
or , according to where you connected your equipment at the
FRONT VGA
back or the front side of your receiver.
Press the OK key to confirm.
Remark : Most equipment (decoder, video recorder) carries out the switching itself.
This is however never the case with a computer connected to the VGA input.
If you want to change to TV channels?
Enter the programme number of the TV channel which you want to watch
with the digit keys.

VGA menu

Only available when a VGA source has been connected and activated. See also the
separate supplied instruction manual with your monitor.
Note : In case you connect your VGA source with a speakerless monitor and without
having connected an audio receiver, all references made to sound reproduction are
not applicable.
&
with the w key and press the OK key to confirm.
Select
VGA
é
Ï key to switch on the
Press the
MENU
Picture 1
VGA
"
Select one of the menus with the cursor left/right.
'
Select one of the menu items with the cursor up/down.
See the separate booklet supplied with the monitor.
Picture 2
q Format,
Z Zoom,
 Zoom factor,
~ Shift,
q Clock frequency,
fi Phase,
X Auto align
(
Press the cursor left/right to alter the selected adjustment.
§
Ï key again to switch off the
Press the
MENU
,
EXT1
VGA
Picture 2 Sound
Sound
(V Volume,)
(- Bass,)
( Treble,)
+
( J Sound mode)
Connect Peripheral Equipment
VGA MONITOR IN
EXT2, EXT3, EXT4, EXT5,
menu.
Setup
Setup
‡ Language,
() Power savings,)
(( AV3,)
(§ VGA2)
menu.
VGA
31