Operation - Philips FTR9964 User Manual

Operation

w
Select your computer or other peripherals
Press this key repeatedly to select
or
TV channels
FRONT, VGA
your peripherals (see p. 31).
Remark: in mode only some keys are valid. See
VGA
Menus and on screen information will disappear if you select
TV VCR DVD SAT TAPE CD TUNER CDR
Press one of these keys to use the remote control directly in the TV,
video recorder, DVD or satellite mode. A green indicator lights up.
Press the same key again within 3 seconds to use the remote
control in the mode indicated below the key (tape, CD, tuner or
CD-recordable). A red indicator lights up.
Press the key again within 3 seconds to return to the function
named above the key.
æ
Teletext Guide on/off see p. 22
OK Press this key to activate your choice,
when in the menus.
V
Volume
Press + or - to adjust the volume.
¬
Sound Mute
Temporarily interrupt the sound or restore it.
P Programme selection
To browse through the TV channels and
sources stored.
Only those channels which are in the
favourite list can be selected with the -P+
keys. See p. 7.
0/9
Digit keys
To select a TV channel.
For a two digit channel number, enter the
second digit within 2 seconds.
To switch immediately to a selected one digit
TV channel, keep the digit key pressed a bit
longer.
i
Screen information
Press to display information about the
selected TV channel and programme, e.g. the
time, the sound reception, the picture
settings, the remaining time set with the
sleeptimer, the reminder set in Teletext
Guide or the On timer settings.
Use of the remote control
12
Use of the remote control
Use of the remote control
Note : In case you connect your TV receiver box with a speakerless monitor, and without having
connected an audio receiver, all references to sound reproduction, volume control, and audio
connections, are not applicable (except for a headphone connection). The keys on the remote
control referring to sound have no function either.
,
EXT1, EXT2, EXT3 EXT4
, according to where you connected
menu, p. 31.
VGA
, ,
EXT5
.
VGA
w
B
TV VCR DVD SAT
TAPE CD TUNER CDR
b S Ì
MOVIE SPORT CHILD NEWS OTHER
® Ò ‡ π †
b
æ
OK
MENU
Ï
V ¬
P
1 2 3
4 5 6
7 8 9
◊
i 0
0
ACTIVE
SMART CONTROL SMART
M a
h
SOUND PICTURE
B
Standby
The set is switched off and the red indicator
lights up.
To switch the TV on again, press - P + or the
digit keys.
If your EasyLink video recorder has the
system standby function and you press the
standby key for 3 seconds, both the TV and
video recorder are switched to standby.
b Dual screen/PIP on/off (FTR9964 only)
See Setup, General menu, p. 8, and Dual
screen/PIP, p. 20.
S
Freeze
Press the S key to activate/de-activate a
frozen picture.
S
Freeze format on/off (FTR9964 only)
This function is not available with a VGA source.
See Setup menu, General, Freeze format,
p. 9 where you can select among three
modes to be displayed when the freeze key is
pressed on the remote control: Freeze,
Replay, Photo finish.
When the mode is : press the S key
Freeze
to activate/de-activate a frozen picture.The
audio continues to play.
When the mode is : press the S key
Replay
to redisplay a few seconds of stored video in
a PIP window. Press the OK key to display a
few seconds of a new stored video picture.
Press the S key again to switch off.
When the mode is
Photo finish
S key to display 12 PIP windows of stored
video pictures. Press the OK key to display a
new series of frozen pictures. Press the S
key again to switch off.
Note: Continuing to hold the S key down will
cycle the TV through the various modes (Freeze,
Replay, Photo Finish).
Ì No function
b
Teletext on/off see p. 25
Ï
Main menu on/off see p. 4
: press the