Related Manuals for Philips 29PT5026C/79
Summary of Contents for Philips 29PT5026C/79
- Page 1 Real Flat Television User Manual 21PT5006 29PT5006 25PT5016 29PT5016 21PT5026 29PT5026...
-
Page 2: Table Of Contents
Introduction Safety information / Tips ... Before calling service ... Basic Installation functions TV hookup (Basic connection) ... Remote control use and care ... Audio/Video connections (Playback) ... Audio/Video connections (Recording) ... Remote control functions ... TV control functions ... TV Installation Menu language selection ... -
Page 3: Safety Information / Tips
SAFETY INFORMATION AND USEFUL TIPS Safety information • Disconnect mains plug when : – the red light below the TV screen is flashing continuously. – a bright white line is displayed across the screen. – cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp chamois leather or soft cloth. -
Page 4: Before Calling Service
Below is a list of frequently occurred symptoms. Before you call for service, make these simple checks. Some of these symptoms can easily be rectified if you know what to do. Symptoms Colour patch (uneveness) No power No picture Good picture but no sound Good sound but poor colour or no picture... -
Page 5: Tv Hookup (Basic Connection)
TV HOOKUP (BASIC CONNECTION) Antenna connection • Connect the aerial plug to the antenna socket on the backcover. • Insert the mains plug into the wall socket. Mains connection • For correct mains voltage, refer to type sticker at the rear of the TV set •... -
Page 6: Audio/Video Connections (Playback)
AUDIO/VIDEO CONNECTIONS (PLAYBACK) Monitor out VIDEO L/Mono AUDIO You can view the playback of DVD discs by using the COMPONENT VIDEO INPUT (CVI) sockets on the rear of the TV. – Connect the CVI cables from the “Y”, “Pb” and “Pr” INPUT of the TV to the “Y”, “Pb”and “Pr”... - Page 7 AUDIO/VIDEO CONNECTIONS (PLAYBACK) ou can view the playback of VCR tapes (Video Disc players, camcorders, etc.) by using the AUDIO and VIDEO INPUT sockets on the rear of the TV. – Connect the video and audio RCA cables from the VIDEO and AUDIO IN on the rear of the TV to the AUDIO and VIDEO OUT of the VCR.
-
Page 8: Audio/Video Connections (Recording)
AUDIO/VIDEO CONNECTIONS (RECORDING) Connection for recording from the TV channel – Connect the video and audio RCA cables from the INPUT sockets of the VCR to the MONITOR OUT on the rear of the TV. – To enhance the sound of your TV, connect the audio cables to an external audio system instead of the VCR. -
Page 9: Remote Control Functions
REMOTE CONTROL FUNCTIONS (Refer to the correct page for the remote control that came with your set) Personal Zapping You can surf up to 10 personal channels for each key (p. 26) Sleeptimer To select a time period after which the set switch to standby mode automatically. - Page 10 REMOTE CONTROL FUNCTIONS (Refer to the correct page for the remote control that came with your set) Teletext /Personal Zapping In teletext mode; the colour keys allows direct access to an item or corresponding pages (p 27-28) In Personal Zapping mode;...
-
Page 11: Tv Control Functions
TV CONTROL FUNCTIONS The TV controls are on the front or the side of the set depending on your model. Mains Power button & Standby light indicator é Remote Sensor “ Volume + / – buttons ‘ Channel œ/o buttons Tip: •... -
Page 12: Menu Language Selection
MENU LANGUAGE SELECTION Operating instructions generally explains the operation of the TV set using the buttons on the remote control unless otherwise stated. Please read the following instructions care- fully and follow the stopes as shown to familiarise yourself with the installations and all features available in your set. -
Page 13: Automatic Tuning Of Channels
AUTOMATIC TUNING OF CHANNELS Automatic tuning of channels allows you to store each programme automatically. Press button Step Enter main menu Press button repeatedly until Install is selected. Enter the Install menu. Select Auto Store. Start automatic tuning of channels. When tuning is completed, exit menu from screen. -
Page 14: Manual Tuning Of Channels
MANUAL TUNING OF CHANNELS Manual tuning of channels allows you to select your preferred channel number for every avail- able programme. Press button Step Enter main menu. Press button repeatedly until Install is selected. Enter the Install menu. Press button repeatedly until Manual Store is selected. - Page 15 MANUAL TUNING OF CHANNELS Press button Step Start manual searching. Searching stops once a transmitting signal is found. Select Channel. Key in the channel number. Press button repeatedly until Store is selected. Store the tuned channel. Note : If you want to continue searching for another transmitting channel, repeat steps 7 to...
-
Page 16: Colour / Sound System
COLOUR / SOUND SYSTEM This feature allows you to select your desired Colour and Sound system. If Auto is selected, the respective colour and sound system will be automatically selected according to the trans- mission system. Note: Select your desired colour and sound system manually if reception is poor in Auto mode. -
Page 17: Fine Tuning Of Channels
This feature allows you to adjust picture reception in areas of weak reception. Press button Step FINE TUNING OF CHANNELS Enter main menu. Press button repeatedly until Install is selected. Enter the Install menu. Press button repeatedly until Manual Store is selected. - Page 18 This feature allows you to skip or edit channels which have bad or weak TV signal or channels that you do not watch often. Note: Once a channel is skipped, you cannot access it by using the CH (Channel) + or – button.You can only access it using the channel digit (0 - 9) buttons. Press button Step HOW TO RESTORE SKIPPED CHANNELS...
-
Page 19: Picture Adjustments
The picture menu allows you to make adjustments to the picture. Press button Step Picture menu items Brightness Colour Contrast Sharpness Colour temperature NR (Noise Reduction) Contrast + PICTURE ADJUSTMENTS Enter main menu. Enter Picture menu. Select item. Adjust level or select desired setting. -
Page 20: Sound Adjustments
SOUND ADJUSTMENTS The sound menu allows you to make adjustments to the sound. Press button Step Sound menu items Treble Boost Bass Boost Balance AVL (Auto Volume Leveller) Tip: In TV mode, you can change the sound to STEREO or MONO by pressing the button to toggle between the two modes. -
Page 21: Format Adjustments
You can have a choice of two formats for your viewing pleasure, namely : -4:3 mode and the EXPAND 4:3 mode through the FORMAT menu. Press button Step Press button repeatedly until Features is selected. Enter the Features menu. Press button repeatedly until Format is selected. -
Page 22: Signal Strength
The Signal Strength feature allows to view the signal strength level when the On option is selected.The signal strength level will be indicated at the bottom of the screen whenever you switch channel. Press button Step SIGNAL STRENGTH Enter main menu. Press button repeatedly until Features is selected. -
Page 23: Active Control
This Active Control feature automatically adjust settings for optimal picture quality continuously under any signal conditions.To activate the Active Control feature, select the “ON” option in the Active Control menu. Press button Step Enter main menu. Enter Features menu. Press button repeatedly until Active Control is selected. -
Page 24: Smart Picture
Whether you are watching a movie or video game, your TV has automatic video control set- tings matched to your current program source or content.The Smart Picture feature quickly resets your TV’s video controls of program for a number of different types of programs and viewing conditions you may have in your home. -
Page 25: Smart Sound
Whether you are watching a movie or video game, your TV has automatic sound control settings matched to your current program source or content.The Smart Sound feature quickly resets your TV’s sound controls of program for a number of different types of programs and viewing conditions you may have in your home. -
Page 26: Personal Zapping
A list or series of favourite TV programs can be selected and stored in the 4 coloured buttons with the Personal Zapping feature. With this feature you can easily viewed up to a total of 10 preferred channels for each coloured button. Adding Channels to the favourite list Step Press button... -
Page 27: Teletext
If a TV channel broadcast contains teletext information, each channel that broadcasts teletext transmits a page (index page) with information on how to use the teletext system, usually on page 100.The system transmitted is indicated in the option line at the bottom of the screen. - Page 28 TELETEXT (Available on certain models only) Press button Interrupt Enlarge Hold Reveal / Conceal Result on screen Press the button to change to TV mode. Press the button again to return to teletext mode and to the teletext page. Press the button once to enlarge and view the top half of the page.
-
Page 29: Specifications
Product type 21PT5006 Picture Display screen type Diagonal screen size 55 cm Visible diagonal screen 51 cm size Aspect ratio Picture enhancements Picture noise reduction Sound Loudspeakers Sound systems Sound features Convenience Reception TV system TV Systems Off Air/ Cable Connectivity Rear Side / Top... - Page 30 Product type 21PT5006 General Mains volt/freq. Power consumption 54 W Net weight 21 kg Gross weight 23.5 kg Set dimensions 594 x 460 x 486 (W x H x D) mm Note: Specifications subject to change without notice. SPECIFICATIONS 29PT5006 25PT5016 100-250V / 50-60 Hz 73 W...
- Page 31 Specifications are subject to change withoutnotice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 2004 © Koninklijke Philips Electronics N.V. All rights reserved. www.philips.com 3139 125 36651...