Messages - Pentax Digibino DB 100 Operating Manual

e09_db100_33e.qk 4/16/02 4:40 PM Page 63

Messages

Messages such as the following may be displayed on the LCD monitor during
DIGIBINO operation.
Memory full
No images in memory
This image is protected.
Battery depleted.
Recording...
(Un)Protecting...
Formatting...
Deleting...
Image folder could not be created.
DIGIBINO can not display this image
The memory is full and no more images can be saved.
Delete unwanted images. (p. 38)
Change the quality/size and try again. (p. 30)
There are no images on the memory.
The image you are trying to delete is a protected image.
The batteries are exhausted. Replace with new batteries or
charged batteries.
The image is being recorded on the memory.
The image is being protected or unprotected.
Memory is being formatted. (p. 44)
The image is being deleted. (p. 38)
The largest file number is assigned to an image and no
more images can be saved. Format the memory. (p. 44)
You are trying to play back an image in a format not sup-
ported by the DIGIBINO. You may be able to display it on
another brand of camera or PC.
63