Setting The Date/Time - Pentax Digibino DB 100 Operating Manual

e02_db100_33e.qk 4/16/02 4:34 PM Page 18

Setting the Date/Time

When the DIGIBINO power is turned on for the first time, the screen for setting
the date and time appears. Set the current date and time.
¡
Raise the LCD monitor, and then press the DIS-
PLAY button.
The DIGIBINO will turn on and the Date Adjust screen will
be displayed on the LCD monitor.
™
Press or button to change the year.
£
Press button.
and will be displayed above and below the month.
18
¢
Date Adjust
2002 / 1 / 1
00 : 00
∞
OK Ok MENU Exit
Date Adjust
2003 / 1 / 1
00 : 00 §
OK Ok MENU Exit
Date Adjust
2003 / 1 / 1
00 : 00
OK Ok MENU Exit
Press or button to change the month,
and then press button.
Repeat Step 4 to change the [day] [hour] and
[minutes].
When you have finished the settings, press the OK button when the
clock reaches 00 seconds.
The screen confirming the settings will be displayed and the DIGIBINO is ready to
take a picture.
Memo
• If the MENU button is pressed, the setting is canceled but shooting is enabled. In this case,
the Date Adjust screen appears again when the power is turned on next. You can change the
settings after they have been made. Refer to "Adjusting the Date/Time" (p.46).
• The time display is 24-hour display format.
Date Adjust
2003 / 2 / 1
00 : 00
OK Ok MENU Exit
Date Adjust
2003 / 2 / 16
11 : 30
Ok Exit
OK MENU
19