e08_db100_33e.qk 4/16/02 4:40 PM Page 58
To disconnect the DIGIBINO from your PC (WindowsXP)
¡
Click [Remove Hardware] icon on the task bar
tray.
™
Make sure [USB Mass Storage Device] is select-
ed and click [Stop].
£
Make sure [USB Mass Storage Device] is select-
ed and click [OK].
¢
After a message for safe disconnection is dis-
played, remove the USB cable from your PC and
the DIGIBINO.
58
Viewing Images with Macintosh
Images recorded with the DIGIBINO can be viewed/edited/printed using a
Macintosh with the included USB cable and the included software.
About the included software
The included CD-ROM contains the following software:
• Image viewing software (ACDSee™ 1.6)
System environment
• OS
: Mac OS 9.0 - 9.2 (QuickTime 4.0 or later required)
• CPU
: PowerPC 266MHz or higher
• Hard disk space
: 6MB or more
• Standard equipped USB port
59