Viewing Images With Windows Pc; Installing The Software (Only For Windows 98Se) - Pentax Digibino DB 100 Operating Manual

e08_db100_33e.qk 4/16/02 4:40 PM Page 52

Viewing Images with Windows PC

Images recorded with the DIGIBINO can be viewed/edited/printed using a PC
with the included USB cable and the included software.
About the included software
The included CD-ROM contains the following software:
• USB driver
• Image viewing software (ACDSee™ 3.1)
System environment
• OS : Windows 98SE/Me/2000/XP
• CPU : Pentium or later recommended
• Hard disk space : 15MB or more
• Standard equipped USB port
52

Installing the software (only for Windows 98SE)

The procedures for installing the necessary software are explained.
Installing the USB driver
Memo
There is no need to install the USB driver for Windows Me, 2000, and XP.
¡
Turn on your PC.
™
Set the included CD-ROM in the CD-ROM drive.
£
Turn the DIGIBINO off, and connect the PC and DIGIBINO using the
included USB cable.
53